Square OP COM V1.45 OBD2 OPCOM For OPEL Diagnostic Tool 3 Years Warranty AIA-1 manufacturer from China ShenZhen Changdashun Technology Co., Ltd.

Square OP COM V1.45 OBD2 OPCOM For OPEL Diagnostic Tool 3 Years Warranty

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Square OP COM

Square OP COM for Opel V1.45 OBD2 OPCOM OP-COM 2010 For Opel 3 Years Warranty

item	op-com
version	1.45

Highlights:

1. Software Version: 201008

Hardware Version: 1.45

2. OP-COM - PC based for Opel diagnostic

3. OP-COM is a PC based diagnostic program.

OPCOM 2010 Function:

1. It covers almost all for Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.

3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

4. Since for Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

5. Fault codes will be shown with all available information

OPCOM 2010 Feature:

1) Full status information (Present, Not present, Intermittent)

2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.

3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.

4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or for Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You can also run output tests on many controllers.

PIN6-PIN14

PIN3-PIN11

PIN1

HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps

MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps

SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

Package List:

1. OP COM Interface

2. USB Cable

3. Software and Drivers CD