1. U485 Descriptions:

   1. This auto scanner (OBD II car reader) easily connects to the diagnostic socket and will quickly find your trouble issues by reading the specific diagnostic trouble codes (DTC) and shows their description as well.

   2. Moreover, this tool can display live data from your car's computer, such as current RPM, engine coolant temperature, vehicle speed, oxygen sensor data, and much more.

   2. U485 Instructions:

   1. OBDII connector cable, connect car and the scan tool.

   2. LCD Display: 128*64 pixel display with contrast adjustment, Backlit.

   3. Enter key selects displayed.

   4. ESC-Exit key go back to the previous screens.

   5. Up/down arrows-moves the selection pointer and scrolls up or down. LEFT/RIGHT arrows-Select responses and moves cursor.

   6. USB interface: connect to USB cable.

   3. U485 Functions:

   1. Read and clear generic and manufacturer specific Diagnostic Trouble Codes (DTCs).

   2. Read Freeze Frame Data.

   3. Test I/M Reading Status.

   4. Read Vehicle Infomation.

   5. Rescan Data.

   6. Turns off check engine light. Trouble codes display on the LCD, needn't the code book. Switch between Metric and English Units!

   7. Scanning live data.

   8. Reads vehicle information including VIN (if your vehicle is able to provide that).

   4. U485 Features:

   1. Easy to use with one plug-in.

   2. Highly reliable and accurate.

   3. Easy-to-read crystal-clear LCD display.

   4. Stand-alone unit with no need for an additional laptop computer to operate.

   5. Performs continuous DTC scan.

   6. Safely communicates with the on-board computer.

   5. U485 Supports Multi Brand Cars And Protocols:

   Vehicle Coverage:

   1. Works on all cars & light trucks that are OBD II compliant since 1996.

   2. Including the VPW, PWM, ISO, KWP 2000 and CAN BUS protocols.

   Protocols Supported:

   SAE J1850 - PWM

   SAE J1850 - VPW

   ISO 9141-2

   ISO 14230-4 - KWP 2000

   ISO 15765-4 / SAE J2480 - Controller Area Network (CAN)

   6. Packing List:

   1* U485 Professional CAN OBD II Auto Scanner Tool

   1* Instruction Manual 

   7. FAQ:

   1. Does My Car Have OBD-II?

   All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.

Two factors will show if your vehicle is definitely OBD II equipped:

1) There will be an OBD II connector located under or around the dashboard, and

2) There will be a note on a sticker or nameplate under the hood: "OBD II compliant".

   2. Where is the connector located?

   The connector must be located within three feet of the driver and must not require any tools to be revealed. Look under the dash and behind ashtrays.